Tools & Supplies

Metallurgical Nut Coke available in 50lb bags. Burns clean and hot without smoke, sparks, or strong odours. We forge weld without the use of flux or kerosene due to clean, non corrosive burn. Generates very little forge scale on your work piece. Typically ships in one week.

Highlights

• Moisture (as received) 3.56%
• Ash (dry basis) 10.34%
• Volatile Matter (dry basis) 0.63%%
• Fixed Carbon (dry basis) 89.03%
• Sulphur (dry basis) 0.67%

55lb bag of professional grade castable monolithic refractory. Dense and abrasion resistant, this refractory is good up to 3000°F. Made in Canada. Typically ships in 1 week.

 Highlights

• Dense
• Abrasion Resistant
• Easy to mix, cast, and cure
• Excellent liner for propane/natural gas forges, solid fuel forges, pizza ovens, and outdoor fire bowls

These German pattern blacksmith hammers are your go-to hammer for most forging. The handle design is based on the lifetime experience of the senior blacksmith in his career as a professionally trained blacksmith. The handles are made in-house by a professional joiner from select timbers and custom fitted to each head with two of our forged steel wedges. The handle is custom made to fit your specific hand shape and size. Designed to used with all day without causing painful blisters or joint damage. The non-slip finish allows for a light grip and easy forging. Do your body a favour and upgrade today. Typically ships in 3 weeks.

Highlights

• Custom fit to your hand
• DIN1041 spec heads
• Designed by a professionally trained blacksmith for best ergonomics

SCT-Low IR Safety Glasses to protect your eyes from cumulative UVA, UVB, and IR exposure during forging. A must have for any blacksmith.

Highlights

• Adjustable temples for length and angle
• Polycarbonate construction for protection from flying debris
• IR, UV-A, UV-B blocking

These German pattern blacksmith hammers are your go-to hammer for most forging. The hammer heads are forged in Germany in a 100 year old blacksmith shop. The handle design is based on the lifetime experience of the senior blacksmith in his career as a professionally trained blacksmith. The handles are made in-house by a professional joiner from select timbers and custom fitted to each head with two of our forged steel wedges. The handle is custom made to fit your specific hand shape and size. Designed to used with all day without causing painful blisters or joint damage. The non-slip finish allows for a light grip and easy forging. Do your body a favour and upgrade today. Typically ships in 3 weeks.

Highlights

• Custom fit to your hand
• Designed by a professionally trained blacksmith for best ergonomics
• Hand-Forged Heads made in a 100 year old German blacksmith shop
  

Carbon based punching lubricant and annealing compound for blacksmithing. This works well for hand punching. After cooling your punch tip in water, dip in the punching lubricant for easier punch extraction from your workpiece. Keep an open can by your anvil and bury any steel in it for annealing.

Highlights

• No smoke, fumes, or smell
  
• Easy clean-up

3”x8” Flat wire block brush for cleaning off forge scale. Solid wood handle and block with carbon steel flat wires. Hand-made in Vancouver. Typically ships in 1 week.

Highlights

• Durable and repairable
• Handmade by a professional broom-maker